This page provides setup instructions for BYOB (Build Your Own Burger) use in Volanté.

Setup

Prerequisites

Build 1809+
1024x768 screen resolution. If higher, it is docked to the top right corner
To enable barcode scanning, Scan Module needs to be loaded and UPC Scan needs to be enabled
- To load the Scan Module: Enable Scan Module from General Setup > Volante Modules > Check off "Scan Module"
  - Please note the user will need to have Scan Module available for use.
- To enable UPC Scan, navigate to System Configuration > Tab 5 > Enable UPC Scan.
  - Ensure Scan Module is loaded, or UPC scan will be disabled in System Configuration.
  - For more details: /wiki/spaces/HAR/pages/56919124

BackOffice Settings

Terminal interfaceLink Setup

Terminal Setup > Advanced > interfaceLink
(BYOB) - KIOSK:2:0:44444:0:3:7:k
After KIOSK:
- Mode 0:1:2:

Mode: 0 - Cashier mode with payment
Mode: 1 - Table-service mode
Mode: 2 - Cashier mode without payment (BYOB Mode)

Employee Code xxxx: (630 in example above)

Loading Kiosk Images

Files you will need:

 ImageImport.txt
 KioskPicImage1.txt
 KioskPicImage2.txt

EDIT THESE FILES TO SET STORE ID TO MATCH THE STORE YOU ARE IMPORTING TO

Edit KioskPicImage1.txt and KioskPicImage2.txt changing the last number from ,XXX to ,ZZZ (ZZZ = store number)

Import from dbisql data menu:

imageImport.txt

Start DBISQL
Click on Data - Import
Browse to ImageImport.txt
Accept defaults
Exit dbisql

Imageloader

Edit volantebackoffice.bat and replace the line 'chezTesoro.mainPackage.BOMain' with 'chezTesoro.interfaces.kiosksTools.ImageLoaderUtility' and rename to Imageloader.bat.

You will need the following parameters to follow:

chezTesoro.interfaces.kiosksTools.ImageLoaderUtility KioskPicImage1.txt , 1
chezTesoro.interfaces.kiosksTools.ImageLoaderUtility KioskPicImage2.txt , 2
chezTesoro.interfaces.kiosksTools.ImageLoaderUtility menuItemDetails , 3

Param1 = path of file
Param2 = the delimiter used in the file
Param3 = (1 - image in menuitemdetails, 2 - image2 in menuItemDetails, 3 - QuickMenuSets)

chezTesoro.mainPackage.BOMain  - Replace with chezTesoro.interfaces.kiosksTools.ImageLoaderUtility  file1 then run again for file 2 and then file 3 (you must edit the batch file and run 3 times)

*Mode: 0 - Cashier mode with payment, 1 - Table-service mode, 2 - Cashier mode without payment (saves bill to tab) 
 *Option 1: 
 **Table mode - Table Name: Name of the table being used for table-service mode 
 **Cashier mode - Transaction Type: 0 - Not specified, 1 - Dine-In only, 2 - Take-Out only 
 *Employee Code: Key code of the employee that will access transactions through the Kiosk. This employee will need the proper permissions to perform either table service by accessing the specified table or   cashier mode. When the kiosk is in use, the employee is clocked in. You may need to clock out this user manually at the end of the day. 
 *PLU Lookup (button to allow Product Lookup via PLU): 0 - Off, 1 - On 
 *Options Mode: 1 - Options only, 2 - Extras only, 3 - Options then Extras, 4 Extras then Options 
 *Payment Types (Cashier mode only): Sum of: 1 - Credit Card, 2 - Customer Account, 4 - Gift Card (e.g. for Gift Card & Customer Account: 2 + 4 = 6) 
 *OrderNumberPrefix: Kiosk in Cashier mode will need to identify on the receipt an Order Number and if there are mutliple Kiosk it needs a prefix to indicate where it was from. ie. T003, T004 another kiosk might be M004,M005...

Ensure store ID is correct.

Kiosk Settings

These were taken out and put in volante.property.en

Timeout: The amount of time in milliseconds allowed for inactivity by the user before the kiosk times out, cancels the order and exit to the idle screen. Default - 30000 milliseconds
End Timer (Cashier mode only): The amount of time in milliseconds allowed at the confirmation screen before it resets back to the idle screen. Default - 8000 milliseconds
KioskSettings.quickMenuSetColumns=5
KioskSettings.quickMenuSetRows=5

Kiosk hardware.png

Related Articles

Filter by label

There are no items with the selected labels at this time.

See Also:

Troubleshooting Articles

Browser not supported